When joists are spaced 16-19.2 inches apart, subfloor should be ¾ inches for both materials. With joist spacing of over 19.2, thickness of plywood should be 7/8 inches and of OSB, 1 inch.

Oriented Strand Board (OSB) doesn't look as good as plywood, but the two are virtually equal in terms of structural stability ...

The home's subfloor then gets placed atop of the joists and can be made from different materials (most often particle board, ...

Hardwood flooring needs to be attached to a subfloor, usually plywood. Then, planks are nailed to the subfloor through the tongue, so the nails don’t show when the floor is completed.

Subfloor. Today I tackled the hall ... and lift until the nails begin to pop or the plywood splits, whichever comes first. It hurts. It takes forever. It just isn't any fun.

or in plywood subflooring. Whichever defect is causing the problem, to cure it permanently you will first have to locate the troublesome boards – the ones that are loose or warped – then ...

The house specifications on the sell sheet indicate that the subfloor consists of 2-X-10-inch southern yellow pine floor joists 16 inches on center covered with a single layer of 3/4-inch plywood.

Wood shrinks and swells as humidity fluctuates with the weather, bringing on squeaking hardwood floors as the planks rub against each other or the subfloor below. Or a plywood subfloor deflects ...

Instead of resting directly on the subfloor, the laminate has an intermediate ... Engineered hardwood flooring’s base core of high-quality plywood is considered to be dimensionally stable.