Order of millivolts output swing to be fed into an ADC I'm using currently using TINA-TI to simulate the TIA, with the ultimate goal of producing a tangible physical version of the circuit in the ...

1. Source Code Path:edgeai-app-stack/edgeai-tiovx-apps/tests/app_tiovx_v4l2_capture_module_test.c 2.Test scene: (1)Only the video is recorded, and the writeRawImage ...

I would like to ask a question because I need to get the spice model of TPS92512. I have downloaded TINA-TI and simulated this part but now I would like to transfer it into LTSpice. When I wnated to ...

We want to add delay function circuit at the TLV7011 output end to get several ms delay. Do you have any suggestion circuit?

Our digital power monitors, including INA232, measure two voltages – shunt and bus. There are separate specifications for them. The 50uV spec is Vos of shunt voltage (on range of 20mV or 80mV); and ...

I have read 800VA Pure Sine Wave Inverter’s Reference Design Application Report SLAA602A – June 2013 – Revised August 2017, it uses a second inverter mode to convert the low voltage DC power to AC, ...

I want to collect the imaginary and real information of 1D-FFT at a frequency of 20 times per second. But there is no way to get only the imaginary and real parts of 1D-FFT from mmWave Demo Visualizer ...

I'm using TPS54360 power switching regulator with enable voltage of 1.2V. So I have set the input voltage range is in 18V-24V. I'm experiencing device shutdown for 7.5ms after powering up the system ...

Could you please refer this thread https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1420924/j784s4xevm-request-for-cpu-load-testing-script ...

I am using the LP-CC2652RB Launchpad to develop a BLE device. I am using CCS 12.8.0.00012 with Simplelink SDK 7.41.0.17 and SysConfig 1.18.1. I am using TI-RTOS7 for the RTOS. When I try to open up ...

I got stuck at using TI's "Solar_CLA.h". We have successfully initialized CLA and ran simple task which was perfectly working. In the next step, I followed the steps provided in the Solar Library ...

We are trying to verify the behavior of a supply-bootstrapped circuit using OPA828 in a TINA simulations. The purpose of the circuit is to reduce the common mode input impedance. However, we can see ...